PoliPlaster®25-S Cement Based Satin Plaster

PRODUCT DESCRIPTION
PoliPlaster®25-S, Cement based ,manually applide satian plaster with polymer and chemical additives for enhanced workability,used fort he preparation of the surface for paint application after finishing coat of plaster.
AREAS OF USE 
PoliPlaster®25-S,is applied on ceilings and plaster coated surfaces in indoors and outdoors spaces in order to smoothen the surfaces before paint application.
PRODUCT ADVANTAGES
-Provides and aesthetically pleasing appearance.
-Prepares the surface for paint application.
-Ensuring high bonding to the surface,the product does not cause spalling and poses high bonding strength.
-Being a high performance product, it does not cause contraction.
-Prepared and applied easily.

PERFORMANCE

he foregoing values represent  the results of the laboratory tsets conducted at 23± 20 C temperature and 50%±5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.

REFERENCE STANDARDS 
Certifications / Stand ds
TS EN 998-1
QUALITY CERTIFICATES
Conformant to TS EN  998-1 GP./CE
APPLICATION PROCEDURE 
Application Surfaces
Indoors and Outdoors walls;
-Cement Based plaster coated surfaces ceilings:
-Cement based plaster coated surfaces.

Surface Preparation
•    Cement based plaster should be applied to surface prior to the application of  PoliPlaster®25-S.
•    The application surface should be dry, clean, sound and dust free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, any such materials as mortar and cement residues should be scraped from application surface.

•    The application surfaces should be moisturized with water, where necessary.
•    Upon the completion of surface cleaning, PoliPrimer®85 primer should be applied in a single coat with a brush and be left to dry for 1 to 2 hours in order to enhance the bonding strength and stabilize the surface absorption.

Application Methods
•    The surface should be moisturized for 2 to 3 days following the application.
•    The surface should be sandpapered following the through dry.
•    The products should not be applied to such surfaces, to which paint, premixed colorful plaster, base coat plaster or exterior coating, and to gypsum surfaces.
•    The product should, once mixed, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during application. 
•    Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared.
•    Any extra water should not be added to the mixture.
•    The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion.
•    The surface should be preserved from air currents and water contact during after the application.
•    The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
•    Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water.
•    The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
•    The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
Surface and Ambient Temperature
The surface and ambient temperature should be between +5°C and +30°C whilst at application.

Application Limits

The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidi

APPLICATION INSTRUCTIONS 
Mixing Ratio
The product should be mixed with water, weighing equal to 38 – 40 % of the product. (7.5 – 8.0 liters of water for a 20 kg package)

Mixing Equipment
•    Low speed electrical mixer (400 cycles / min.)
•    Special tip stirring equipment.

Mixing Period 
The product should be stirred with a low speed mixer until any dry dust and globs are eliminated. The mortar should, then, be stirred once again for 1 to 2 minutes after being had settled for 3 to 4 minutes following preparation. 

Application Equipment
•    Steel trowel
•    Smoothing trowel 
•    Sandpaper, sponge

Equipment Cleaning
The equipment used should be cleaned with water following the application before the mortar dries. 
ty conditions. The values provided as per the table may vary depending on the surface and ambient conditions. 

CONSUMPTION
Recommended consumption amount for application in roughly 1 mm thickness on 1 m² surface is 2.25 – 2.75 kg. The said values may vary, depending on the surface and ambient conditions.

PACKAGING
 PoliPlaster®25-S , is delivered in net 20 kg craft bags, which are stowed in 64 pcs. on a 100 cm x 100 cm palette (1280kg).

SHELF LIFE 
The shelf life of the product is 12 months when stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5C° and +25°C) environment.

STORAGE CONDITIONS
The product should be stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5C° and +25°C) environment.
It should not be exposed to direct sunlight.
The container of the product should be closed firmly when not used.

SAFETY PRECAUTIONS
Please refer to Safety Data Sheet (SDS) as appropriate for easy and safe application.